JUNO – Paints manufacturers since 1927

Products

Elastiflex Plus


Elastomeric Pure Acrylic Waterproof coating based on photo-crosslinkable resins in aqueous dispersion. Elastiflex is an elastic breathable coating (up to 4mm crack bridging capacity) , resistant to the formation and growth of microorganisms. Product forms a continuous elastic and waterproofing film which creates an effective barrier against concrete carbonation, minimizing risk of corrosion in any type of reinforced structure. Contains anti-mould preservatives. Permanent elasticity from -30ºC to +60ºC.

Recommended for vertical and horizontal waterproofing
on façades, terraces and roofing without cracks or with
cracks up to 4 mm, provided there is a run-off slope
above 1%. Also particularly suitable for eliminating
moisture problems in hard to reach places that are not
exposed to continuous traffic.

Use: Exterior
Sizes: 15 Litres, 4 Litres
Finish
Matt
Practical coverage
6-8 m²/L/coat
Dilution
Water
Cleaning
Soapy water
Drying time
2 hours Touch dry
Repaint time
Minimum. 24 hours
Maximum. Unlimited
Colours
  • Maximum coverage and stability guarantee
  • High traction resistance
  • Wide elasticity range (-30º C to +60º C)
  • 100% acrylic with excellent impermeabiliation and mechanical properties
  • Prevents the formation of micro-cracks and cracks due to surface movement
  • Extraordinary crack-resistance (+2mm)
  • Transpirable
  • Effective barrier against concrete carbonation, reducing the risks of corrosion of concrete reinforcement.
  • Contains additives preventing the formation of microorganisms
  • Eliminates moisture problems in hard to reach places
  • Improves building's energy efficency
adhesion-pinturas-juno__en
Adhesion
anti-carbonation-pinturas-juno__en
Anti-carbonation
epd-system-pinturas-juno__en
EPD
retardant-bs1d0-pinturas-juno__en
Fire retardant B-s1, d0
permeability-pinturas-juno__en
Permeability
resistance-pinturas-juno__en
Resistance
solar-reflective-pinturas-juno__en
Solar reflective
transmission-pinturas-juno__en
Transmission

Brush, roller or spraying.
Stir paint throughly until completely homogenized. Apply on consistent, clean, completely dry surfaces, free from efflorescence (saltpetre) and mould. For more information, consult TDS.